Part Number Hot Search : 
160MT80K AT90S23 MUR1010E SSFT4004 FM107 1E05UM MAX20 7950K13
Product Description
Full Text Search
 

To Download Q65110A1058 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Golden Dragon(R) 1 Watt LED LW W5SG
Vorlaufige Daten / Preliminary Data
Besondere Merkmale * Gehausetyp: weies SMD Gehause * Besonderheit des Bauteils: Hoch effiziente Lichtquelle bei geringem Platzbedarf * Farbort: x = 0,32, y = 0,31 nach CIE 1931 (wei) * typische Farbtemperatur: 6500 K * Farbwiedergabeindex: 80 * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaN * optischer Wirkungsgrad: 21 lm/W * Gruppierungsparameter: Lichtstarke, Farbort * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten * Vorbehandlung: nach JEDEC Level 4 * Gurtung: 24 mm Gurt mit 800/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach EOS/ESD-5.1-1993 Features * package: white SMD package * feature of the device: High efficient lightsource at low space * color coordinates: x = 0.32, y = 0.31 acc. to CIE 1931 (white) * typ. color temperature: 6500 K * color reproduction index: 80 * viewing angle: Lambertian Emitter (120) * technology: InGaN * optical efficiency: 21 lm/W * grouping parameter: luminous intensity, color coordinates * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering * preconditioning: acc. to JEDEC Level 4 * taping: 24 mm tape with 800/reel, o180 mm * ESD-withstand voltage: up to 2 kV acc. to EOS/ESD-5.1-1993 Applications * exterior and interior automotive lighting (e.g. front light, fog lamp, dashboard backlighting) * backlighting (illuminated advertising, general lighting) * reading lamps (aircraft, car, bus) * substitution of micro incandescent lamps * indoor and outdoor commercial and residential architectural lighting * displays where high brightness is required e.g. TFT * decorative and entertainment lighting * signal and symbol luminaire for orientation * marker lights (e.g. steps, exit ways, etc.)
Anwendungen * Auen- und Innenbeleuchtung im Automobilbereich (z.B. Scheinwerfer, Nebelscheinwerfer, Instrumentenbeleuchtung) * Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung) * Leselampen (Flugzeug, Auto, Bus) * Ersatz von Kleinst-Gluhlampen * Fassadenbeleuchtung im Innen- und Auenbereich * Displays mit hohem Helligkeitsbedarf z. B. TFT * Dekorative Beleuchtung * Signal- und Symbolleuchten zur Orientierung * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.)
2003-09-08
1
LW W5SG
Typ Emissionsfarbe Color of Emission Farbe der Lichtaustrittsflache Color of the Light Emitting Area Lichtstrom Lichtstarke Bestellnummer
Type
Ordering Code Luminous Flux IF = 350 mA V (mlm) 21000 ... 39000 Luminous Intensity IF = 350 mA IV (mcd) 10000 (typ.) Q65110A1058
LW W5SG-GYHY-5K8L
white
colored diffused
Anm.: -5K8L Farbselektiert nach Farbortgruppen (siehe Seite 6) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe, die aus 4 Drittelgruppen besteht. Einzelne Drittelgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Drittelgruppe enthalten. Note: -5K8L Color selection acc. to Chromaticity coordinate groups (please see page 6) The standard shipping format for serial types includes a family group of 4 individual third groups. Individual third groups are not available. No packing unit / tape ever contains more than one luminous intensity third group.
2003-09-08
2
LW W5SG
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stostrom Surge current t 10 s, D = 0.005 Sperrspannung1) Reverse voltage Leistungsaufnahme Power consumption Warmewiderstand* Thermal resistance* Sperrschicht/Lotpad Junction/solder point
1)
Symbol Symbol
Wert Value - 40 ... + 100 - 40 ... + 100 110 350 t. b. d.
Einheit Unit C C C mA mA
Top Tstg Tj IF IFM
VR Ptot
1.2 1.5
V W
Rth JS
9
K/W
fur kurzzeitigen Betrieb geeignet / suitable for short term application
*Montage auf PC-Board - Metallkernplatine, = 1.3 W/(m*K), fur weitere Informationen siehe Applikationsschrift im Internet (www.osram-os.com). *Mounted on PC board - metall core PCB, = 1.3 W/(m*K), for further Information please find the application note on our web site (www.osram-os.com).
2003-09-08
3
LW W5SG
Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter (typ.) Farbkoordinate x nach CIE 1931 1) Chromaticity coordinate x acc. to CIE 1931 IF = 350 mA Farbkoordinate y nach CIE 1931 1) (typ.) Chromaticity coordinate y acc. to CIE 1931 IF = 350 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 2) Forward voltage IF = 350 mA Sperrstrom Reverse current VR = 1.2 V Temperaturkoeffizient von x Temperature coefficient of x IF = 350 mA; -10C T 100C Temperaturkoeffizient von y Temperature coefficient of y IF = 350 mA; -10C T 100C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 350 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 350 mA
1)
Symbol Symbol x
Wert Value 0.32
Einheit Unit -
y
0.31
-
(typ.) (min.) (typ.) (max.)
2
120
Grad deg. V V V
VF VF VF
3.8 4.0
(max.) (typ.)
IR TCx
100 -0.1
A
10-3/K
(typ.)
TCy
-0.2
10-3/K
(typ.)
TCV
-4.0
mV/K
(typ.)
opt
21
lm/W
Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01. Durchlassspannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Forward voltage values are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V.
2)
2003-09-08
4
LW W5SG
1)
Farbortgruppen Chromaticity coordinate groups
0.9 520 0.8 Cy 0.7 0.6 500 0.5 0.4 0.3 0.2 0.1 0 0 580 590 600 610 620 630 510 530 540 550 560 570
+
490 480 470 460 450 0.1 0.2 0.3 0.4 0.5
E
0.6
0.7 Cx
0.8
0.9
2003-09-08
5
0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37
Cx
OHA08327
0.42 0.41 0.40 Cy 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.20
8L 8K 7L
6L 6K 5L 5K 4L 4K 3L 3K
+
7K
LW W5SG
Farbortgruppen1) Chromaticity coordinate groups
Gruppe Group 3K
Cx 0,273 0,266 0,280 0,286
Cy 0,227 0,232 0,252 0,244 0,244 0,252 0,268 0,259
Gruppe Group 5K
Cx 0,296 0,291 0,310 0,296
Cy 0,259 0,268 0,297 0,259 0,284 0,297 0,330 0,310
Gruppe Group 7K
Cx 0,330 0,330 0,338 0,352
Cy 0,310 0,330 0,342 0,344 0,344 0,342 0,380 0,357
4K
0,286 0,280 0,291 0,296
6K
0,313 0,310 0,330 0,330
8K
0,352 0,338 0,364 0,360
1)
Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01.
Farbortgruppen1) Chromaticity coordinate groups
Gruppe Group 3L
Cx 0,266 0,258 0,273 0,280
Cy 0,232 0,239 0,261 0,252 0,252 0,261 0,279 0,268
Gruppe Group 5L
Cx 0,291 0,285 0,307 0,291
Cy 0,268 0,279 0,312 0,268 0,297 0,312 0,347 0,330
Gruppe Group 7L
Cx 0,330 0,330 0,347 0,345
Cy 0,330 0,347 0,371 0,352 0,352 0,371 0,401 0,380
4L
0,280 0,273 0,285 0,291
6L
0,310 0,307 0,330 0,330
8L
0,345 0,347 0,367 0,364
1)
Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01.
2003-09-08
6
LW W5SG
Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group GY GZ HX HY Lichtstrom Luminous Flux V (mlm) 21000 ... 24000 ... 28000 ... 33000 ... 24000 28000 33000 39000 Lichtstarke Luminous Intensity IV (mcd) 7500 (typ.) 8500 (typ.) 10000 (typ.) 12000 (typ.)
Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11%.
Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: GZ-6K Example: GZ-6K Lichtgruppe Luminous Intensity Group G Drittelgruppe Third Group Z Farbortgruppe Chromaticity Coordinate Group 6K
2003-09-08
7
LW W5SG
Relative spektrale Emissionsiehe Funote 1 auf Seite 9 Relative Spectral Emissionsee remark 1 on page 9 Irel = f (), TA = 25 C, IF = 350 mA
100 %
V() =
spektrale Augenempfindlichkeit Standard eye response curve
OHL01461
I rel
80
V
60
40
20
0 400
450
500
550
600
650
700
nm 750
Abstrahlcharakteristiksiehe Funote 1 auf Seite 9 Radiation Characteristicsee remark 1 on page 9
40 30 20 10 0
Irel = f ()
OHL01660
1.0
50
0.8
0.6 60 0.4 70 0.2 80 90 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 0
2003-09-08
8
LW W5SG
Durchlassstrom1) Forward Current1) IF = f (VF); TA = 25 C Relative Lichtstrom1) 2) Relative Luminous Flux1) 2) V/V(350 mA) = f (IF); TA = 25 C
OHL00830
IF
10 3 mA
10 1
OHL00831
V (350 mA)
V
10 0
10 2
10 -1
10 1 2.8
3.2
3.6
4.0
4.4
4.8 V 5.2
10 -2 1 10
10 2
mA 10 3
VF
Farbortverschiebung1) Chromaticity Coordinate Shift1) x, y = f (IF); TA = 25 C
OHL00829
IF
0.324 Cy 0.320 0.318 0.316 0.314 0.312 0.310 0.308 0.306 0.304 0.302 0.300 0 200 400 600 mA 1000
2)
Cx
1)
Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen Werten unterscheiden konnen . Due to the special conditions of the manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data or the typical characteristic line. Im gestrichelten Bereich der Kennlinie muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit.
Cy
IF
2003-09-08 9
LW W5SG
Relative Lichtstarkesiehe Funote 1 auf Seite 9 Relative Luminous Intensitysee remark 1 on page 9 IV/IV(25 C) = f (TS); IF = 350 mA
IV I V (25 C)
1.2 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 1.4
OHL02870
Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (TS)
0
20 40 60
C 100
T
2003-09-08
10
LW W5SG
Mazeichnung Package Outlines
0...0.1 (0.004) A Heat sink Protection Diode R1.5 (0.059) 1.9 (0.075) C 1.7 (0.067) Cathode marking
11.2 (0.441) 10.8 (0.425) 1.2 (0.047)
6.2 (0.244) 5.8 (0.228)
0.8 (0.031) (o4.2 (0.165))
0.29 (0.011) 0.24 (0.009)
7.2 (0.283)
1.0 (0.039) 0.8 (0.031) 2.0 (0.079) 1.6 (0.063)
GPLY6192
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung: Markierung Cathode mark: mark Gewicht / Approx. weight: 0.2 g
2003-09-08
11
6.8 (0.268)
LW W5SG
Lotbedingungen Vorbehandlung nach JEDEC Level 4 Soldering Conditions Preconditioning acc. to JEDEC Level 4
IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501)
300 C
OHLY0597
T
250
240-245 C 10-40 s 183 C 120 to 180 s Ramp-down rate up to 6 K/s Defined for Preconditioning: up to 6 K/s Ramp-up rate up to 6 K/s
200
150
100
50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 s 250
t
2003-09-08
12
LW W5SG
Empfohlenes Lotpaddesign Recommended Solder Pad IR Reflow Loten IR Reflow Soldering
Achtung: Anode und Heatsink sind elektrisch verbunden Attention: Anode and Heatsink are electrically connected Footprint
3 Lotstellen 3 solder points 14.4 (0.567) 3.0 (0.118) Thermisch optimiertes PCB Thermal enhanced PCB
o4.0 (0.157) 15.0 (0.591) 14.4 (0.567)
o4.0 (0.157)
Lotstopplack Solder resist
Kupfer Copper
3.0 (0.118)
OHAY0681
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2003-09-08 13
10 (0.394)
Recommended Solder Pad Design
0.3 (0.012)
3.0 (0.118)
Empfohlene Padgeometrie
3.0 (0.118)
LW W5SG
Gurtung / Polaritat und Lage Verpackungseinheit 800/Rolle, o180 mm Method of Taping / Polarity and Orientation Packing unit 800/reel, o180 mm
11.5 (0.453)
4 (0.157) 1.55 (0.061) 2 (0.079)
1.75 (0.069)
0.3 (0.012)
12.4 (0.488)
7.35 (0.289)
0.3 (0.012)
C
24 (0.945)
Protection Diode 1.9 (0.075) Heat sink A
OHAY0508
6.35 (0.250) 8 (0.315)
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)
2003-09-08
14
LW W5SG
Revision History: 2003-09-08 Previous Version: Page Subjects (major changes since last revision)
Date of change
Patent List Patent No. US 6 066 861, US 6 277 301, US 6 245 259
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. All typical data and graphs are basing on representative samples, but don't represent the production range. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2003-09-08
15


▲Up To Search▲   

 
Price & Availability of Q65110A1058

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X